Kirby Restaurant & Chemical Supply
Dean D60G, Decathlon Gas Fryer
Designed for general purpose usage with plenty of power for peak production demands
Use this frying workhorse to profitably fry “full-size” products, including Mexican foods and chicken, as well as fries and breaded products - fresh or frozen.
Make the most of your energy dollars with our exclusive thermo-tube design. The four heating tubes are surrounded by oil and heat absorption is maximized with controlled flow tube diffusers. The energy is forced into the oil, with less going unused up the vent. This provides quick heat-up time relative to gas consumption, low idle cost per hour during slow periods, and low gas consumption per pound of product cooked.
Save on your bill - use only 35-50 lbs. (20-28 L) of oil for optimum cooking efficiency. Plus, Dean’s cool zone design minimizes oil deterioration by trapping debris under the cooking area, preventing carbonization of particles and oil contamination. Sloped bottom with 1.25” (3.175 cm) drain valve makes cleaning fast and easy.
Enjoy powerful recovery - Dean’s accurate mechanical thermostat and 120,000 BTUs (30,600 kcal) (35.2 kW) of input power eliminate time lost in waiting between loads and requires no electrical hookup.
Build in a filter, add a dump station, or combine units to form a fry battery. Dean’s versatility and flexibility are unsurpassed!
Please Note: Fryer is shown with optional casters.
• Construction- Stainless steel frypot, front and door, enamel sides
• Hanger- Basket hanger and two fry baskets
• Cool Zone- Cool zone fry vessel construction
• Pilot System- Millivolt pilot system - requires no electrical hookup
• Legs- 6" (15 cm) adjustable steel legs
• Thermostat- Mechanical Thermostat
• Rack- Basket Rack
• Gas Connection- 3/4" NPT Gas connection
• Gas Valve- Combination gas valve with regulator
• BTU- 120,000 BTU
• Frying Area- 14" x 14" frying area
• Oil Capacity- 35-50 lb oil capacity
Power Input Type Gas
Secondary Power Input Rating 115-120/60/1
Power Output 150,000 BTUs(37,783 kcal/hr.) (44 kW) natural or LP gas input (3/4”N.P.T. connection) and Thermatron solid state temperature control requiring 120V/3.5 A.
Dimensions: W: 20" x D: 36.5" x H: 45"
Download Manufacturer's Specification Sheet
Spec sheets often take a moment to load, please be patient after clicking on the link.If you cannot open the file, click here to download a free copy of Acrobat® Reader™.
5-10 business days
Unless otherwise noted, this item generally drop ships by common carrier, and does not include lift gate service, inside delivery, unpacking/uncrating or other special handling. Purchaser is responsible for installation and utility connections by qualified personnel in accordance with local codes and manufacturer recommendations. Improper installation may void manufacturer warranty. Selling dealer may offer special shipping, delivery, installation and other support services at an additional cost. Please inquire prior to completing purchase transaction if such services may be required.
Free Freight in the continental U.S.
|
|
Kirby Restaurant & Chemical Supply
809 S. Eastman RoadLongview, TX 75602
Main Phone: (903) 757-2723
Toll Free: (800) 877-5472
Fax: (903) 757- 9519
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Our Policy: Personal Information Will Stay Confidential
Copyright © 2005-2012 Kirby Restaurant & Chemical Supply
stay connected
 |
||
