Cleveland 21CET8, SteamCraft Ultra 3 with Electiric Generator
SteamCraft Ultra 3, Model 21CET8 with Electric Generator
COUNTER TYPE DESIGN, PRESSURELESS CONVECTION STEAMER, ELECTRIC STEAM GENERATOR, 8 KW
CLEVELAND, SteamCraft Ultra 3, one compartment, Counter-Type Steamer, Model 21-CET-8. Heavy duty all Stainless Steel construction. Rear mounted, insulated Steam Generator with Remote Probe Type Water Level Controls and Automatic Steam Generator Blowdown with Water Jet Drain Cleaning feature.
Product Features
Cooking Capacity - For up to three 12" x 20" x 2 1/2" deep Cafeteria Pans.
Steam Generator - Innovative PowerPak Electric Steam Generator with one Special Stainless Steel Fire Bar Heating Element. Strong 14 Gauge Stainless Steel Construction. Large 3.5 gallon generator reservoir for fast steam cooking production. Fully insulated rear mounted steam generator.
Generator Cleaning Port - Easy access Generator Cleaning Port located on the outside, top of the unit. Not necessary to remove hot panels or rack guides to access.
Generator Cleaning Light - Indicator Light located on the front of the unit warns operator it is time to delime generator.
Stand By Mode - Instant Steam Stand By Mode holds generator at a steaming temperature. Allows unit to start cooking instantly.
Construction - Durable 14 Gauge, Stainless Steel Construction for compartment door, cavity and steam generator.
Controls - One 60 Minute Electro-Mechanical Timer and Switch for manual operation: audible signal for cooking time. Main Power On/Off
Switch: Automatic Water Fill.
Steam Distribution - Exclusive Steam Cooking Distribution System: Maintenance Free Exclusive Brass Steam Jets produce a high velocity convection steam without fans. Coved Corner design in cooking compartment distributes heat evenly, and is easy to keep clean.
Creased top & bottom enhance drainage. Cold water condenser behind drain maintains a dry steam.
Fully insulated cooking compartment for thermal efficiency.
Removable Stainless Steel Slide Racks for easy cleaning.
Generator Drain - Automatic Generator Drain: contains a "Water Jet" Spray Rinse Drain Cleaning Cycle to keep drain clear.
Remote Probe - Exclusive Automatic Remote Probe Type Water Level Control: Separate from the generator for easy access.
Door Design - Exclusive "Cool to the Touch" Two-Piece Compartment Door Design: Free floating inner door with reversible gasket provides an air tight seal. Stainless Steel Slam/Latch Door Latch mechanism for reliability.
Left Hand Door Hinging - Compartment Doors hinged on the left, controls on the right.
Electrical - Available in most voltages, single or three phase only.
Stackable - By using the optional (STKI) Stacking Kit and Optional Stacking Stand (ES2130S) (2 units only).
If you're looking to save electricity, gas, water, or all three, Manitowoc Enerlogic is your guide.

This product has been tested and proven to deliver energy and resource-saving performance. Manitowoc Enerlogic products have been rated as energy-saving by the California Energy Commission, earned an Energy Star rating, or met others standards for energy and resource conservation.
Click the following link for more information on Manitowoc Enerlogic products.
  
|
|
One Compartment, Capacity for (3) 2.5" x 12" x 20" steam table pans, 8.0 kW Electric Stainless Steel Generator Convection Steamer with easy access Deliming Port, 208 volt, 3 phase, 26 amps 60- Minute Mechanical Timer, Ideal for a la carte and heavy volume cooking, Shipping weight is 179 lbs.
Dimensions: W: 21" x D: 28" x H: 22.25"
Spec sheets often take a moment to load, please be patient after clicking on the link.
If you cannot open the file,
click here to download a free copy of Acrobat® Reader™.
One Year Parts and Labor Warranty Standard. Backed by the Enodis STAR Service Network, helping to extend the life of your equipment and reduce ownership costs with expert service and genuine factory parts.
Ships from Manufacturer-Within 5-7 business days
Unless otherwise noted, this item generally drop ships by common carrier, and does not include lift gate service, inside delivery, unpacking/uncrating or other special handling. Purchaser is responsible for installation and utility connections by qualified personnel in accordance with local codes and manufacturer recommendations. Improper installation may void manufacturer warranty. Selling dealer may offer special shipping, delivery, installation and other support services at an additional cost. Please inquire prior to completing purchase transaction if such services may be required.

We normally ship UPS ground.
The shipping calculator will present you with all choices available. |
The shopping cart will calculate your shipping cost.
- Click on the Add to Cart button above and follow the steps.
- On the shopping cart page please type your zip code and press enter.

- Then choose your preferred method of shipping. The correct shipping amount
will be added to the item price along with any tax required.
If you have questions about shipping call our internet sales department.
Orders are normally filled within 48 hours. Calls after 2 PM CST will be processed the following day.
You will receive
e-mail notification when your item is shipped. If we are temporarily out of stock or if your item has to shipped from a manufacturers warehouse you will be informed by our sales department.
Be sure to check your shipment immediately for freight Damage. If you sign for the shipment and the damage is not reported at the time of delivery the freight company will not accept any liability.
Please Read important information about: Our D.A.D.S. Return Policy. |
Free Freight in the continental U.S. |
Your item will be shipped from our warehouse or the most available manufacturers warehouse with in the time specified by the manufacturer.
Kirby will choose the freight service that can deliver in the most efficient cost effective manner from a list of qualified companies in our freight consortium.
Be sure to check your shipment immediately for freight Damage. If you sign for the shipment and the damage is not reported at the time of delivery the freight company will not accept any liability.
Please Read important information about: Our D.A.D.S. Return Policy.
If you have questions about shipping call our internet sales department.
|

Our Freight Rate Calculator wiil give you the lowest price carrier available.
Follow the easy steps to checkout:
- Click the Add To Cart Button to get started.
- Select Any Additional Freight Services You Need.
- Enter your zip code.
|
Freight charges are quoted using common carrier without lift gate or residential service fees. If you need these or other special services please specify your need in STEP 1.
The correct shipping amount will be added to the item price along with any tax required on the shopping cart page when you hit the Continue button in STEP 3.
Your item will be shipped from our warehouse or the most available manufacturers warehouse with in the time specified by the manufacturer.
Kirby will choose the freight service that can deliver in the most efficient cost effective manner from a list of qualified companies in our freight consortium.
Be sure to check your shipment immediately for freight Damage. If you sign for the shipment and the damage is not reported at the time of delivery the freight company will not accept any liability.
Please Read important information about: Our D.A.D.S. Return Policy.
If you have questions about shipping call our internet sales department.
|
|
Interested?
Call 800-877-5472 Ext.241 for a 100% complete quote for the Equipment, Shipping, taxes and reliable Delivery Schedule. |
Why are we asking you to call to order this item?
Non -Standard weight, size and Shipping distances must be figured into
the total cost of this item to insure your purchasing satisfaction and avoid costly mistakes.
You will get our “Best information and Price” when you allow our salespeople
to take a few hours to gather all the information need to prepare competitive quote.
|